40×40 ALU Montageprofil Montageschiene in 6,00m
MwSt. entfällt & zzgl. Versandkosten, da Speditionsversand notwendig
Auch in weiteren Längen verfügbar: 1,20m | 1,90m | 2,40m | 3,30m | 3,60m | 4,80m | 6,60m
Montageschiene aus Aluminium mit statischem Nachweis (40x40mm)
- Untere Anbindung mit Hammerkopfschraube (M10) oder Sechskantschraube (DIN 933 M 10*25)
- Obere Anbindung mit Nutenstein (M8) und Inbusschraube oder vorkonfektionierten Klickfix Klemmen
- Spannweite bis zu 2,45 m
Eigenschaften:
- Hohe Beständigkeit gegen Korrosion, Witterung und äußere Einflüsse
- Gute mechanische Festigkeit und Schlagfestigkeit.
Wir können Ihnen aus unseren Lagerlängen auch ihre Wunschlängen schneiden. Wählen Sie dafür die Anzahl der vollen Profillängen aus, die Sie für Ihre Wunschlänge benötigen sowie die Anzahl der benötigten Schnitte mit dem Artikel “Wunschlänge Profile – Schnittkosten”
Alle weiteren Informationen, sowie Schnittkosten finden sie auf der Artikelseite “Wunschlänge Profile – Schnittkosten”
Beschreibung
Unsere Performance Montageschiene Standard (40×40 mm) ist ein bewährter Favorit und wird an den meisten Installationsstandorten in Deutschland und Europa eingesetzt.
Das Montageprofil besteht aus Aluminium (blank) und ermöglicht Spannweiten von bis zu 2,45 m, abhängig von verschiedenen Faktoren wie Schnee- und Windlastzone, Geländekategorie und Neigungswinkel des Dachs.
Das Montagesystem gehört zur Performance-Serie und hat eine Breite von 40 mm und eine Höhe von 40 mm. Die Länge variiert je nach Ausführung. Die Oberfläche ist aus blankem Aluminium, und der Werkstoff besteht aus Aluminium EN AW 6063-T6.
Die Mindestabnahmemenge beträgt 1 Stück, und die Verpackungseinheit ist 100 Stück pro Bund. Das Gewicht beträgt 0,782 kg pro Meter.
Die obere Kanalanbindung erfolgt mit einem Nutenstein im M8-Gewinde, der an jeder Stelle eingeschwenkt werden kann, um die Modulklemmen mit einer Inbusschraube zu befestigen. Alternativ kann auch unser Schnellbausystem mit Klickklemmen verwendet werden.
Die untere Kanalanbindung erfolgt entweder über den Kopf einer Sechskantschraube DIN 933 M10x25 oder einer Hammerkopfschraube. Die Sechskantschraube ist kostengünstiger, erfordert jedoch das Einfädeln von der Seite, während die Hammerkopfschraube an jeder Stelle eingedreht werden kann.
Passend dazu...
40×40 ALU mounting profile mounting rail in 6,00m
VAT & plus shipping costs, as forwarding shipment necessary
Only for a short time! Save 10% with the code: RAIL10
Also available in other lengths: 1.20m | 1.90m | 2.40m | 3.30m | 3.60m | 4.80m | 6.60m
Mounting rail made of aluminium with static detection (40x40mm)
Lower connection with hammer head screw (M10) or hex head screw (DIN 933 M 10*25)
Upper connection with slotted (M8) and Allen screw or pre-assembled Klickfix terminals
Span up to 2.45 m
Features:
High resistance to corrosion, weather and external influences
Good mechanical strength and impact resistance.
We can also cut your desired lengths from our stock lengths. Select the number of full profile lengths you need for your desired length and the number of cuts required with the article “Desired Length Profiles – Cutting Costs”
All further information, as well as cutting costs you can find on the article page “Desired length profiles – cutting costs”
Beschreibung
Our Performance Mounting Rail Standard (40 40 mm) is a proven favorite and is used at most installation sites in Germany and Europe.
The mounting profile is made of aluminium (blank) and allows spans of up to 2.45 m, depending on various factors such as snow and wind load zone, terrain category and inclination angle of the roof.
The mounting system is part of the Performance series and has a width of 40 mm and a height of 40 mm. The surface is made of bare aluminium and the material is aluminium EN AW 6063-T6.
The minimum order quantity is 1 piece, and the packing unit is 100 pieces per bunch.The weight is 0.782 kg per meter.
The upper channel connection is made with a slotted block in the M8 thread, which can be swivelled in any place to fix the module terminals with an Allen screw. Alternatively, our quick-build system with click clamps can also be used.
The lower channel connection is either via a head of a hex screw DIN 933 M10x25 or a hammer head screw. The hex bolt is more cost effective, but requires threading from the side while the hammer head screw can be screwed in at any point.