Cross-dressing angle for mounting rails
VAT is not applicable & plus shipping costs
– Angle ALU for cross-link
– Mounting of the angle on lower profile in the M8 slot
– Fixing of the upper profile laterally
Description
Technical details and application:
This angle is commonly used to connect two profiles in the cross junction. The lateral screwing of the upper profile is carried out with a slotted block and an 8×16 Allen screw, while the lower profile in the upper channel is also connected to a slotted block and an 8×16 Allen screw. In this case, two screws can be used each time, because the long hole is longer. The angle is 4 cm wide, the short leg measures 38 mm and the longer leg 58 mm. The two long holes are each 9 mm wide for M8 screws and the material thickness is 6.5 mm.
This item is part of our regular stock and therefore always available in usual quantities and is continuously reordered. If an article is not in stock, we will contact you immediately after your order. In most cases, the delivery time is short or we can find an alternative solution together.
Product features and benefits:
Features:
Angle width: 40 mm
Length of short legs: 38 mm
Longer thigh length: 58 mm
Width of the long holes: 9 mm for M8-screw connection
Material thickness: 6.5mm
The zero VAT rate according to section 12, paragraph 3 UstG applies from 01.01.2023 for solar modules as well as for essential components for operating a photovoltaic system, including the storage, for storing the electricity generated by the solar modules. This only applies to photovoltaic system operators if the photovoltaic system is installed in or near private homes, apartments and public and other buildings used for non-profit purposes. The maximum power of the system must not exceed 30 kW (peak) according to the market master data register.
By entering into the purchase contract with a zero VAT rate, the buyer confirms that he is purchasing as a photovoltaic system operator and that the preconditions described in paragraph (1) are