Push-in connector for PV mounting rails

Delivery time approx. 3-5 working days

VAT is not applicable & plus shipping costs

– Please use two pieces per connection if possible –

Fast connection of our assembly rails
easy assembly

Personal pick-up in Hörstel / Wuppertal possible

1,23  / piece

Categories: ,

Photovoltaik AGBs:

  1. Der Null-Umsatzsteuersatz gemäß Abschnitt 12, Absatz 3 UstG gilt ab 01.01.2023 für Solarmodule sowie für wesentliche Komponenten zum Betrieb einer Photovoltaikanlage, einschließlich des Speichers, zur Aufbewahrung des mit den Solarmodulen erzeugten Stroms. Dies gilt nur für Photovoltaikanlagenbetreiber, wenn die Photovoltaikanlage in oder in der Nähe von Privatwohnungen, Wohnungen sowie öffentlichen und anderen Gebäuden, die für Gemeinnützigkeit genutzt werden, installiert wird. Die maximale Leistung der Anlage darf 30 kW (peak) gemäß Marktstammdatenregister nicht überschreiten.
  2. Der Käufer bestätigt durch Abschluss des Kaufvertrags mit einem Null-Umsatzsteuersatz, dass er als Photovoltaikanlagenbetreiber kauft und die in Absatz (1) beschriebenen Voraussetzungen erfüllt. Die Eintragung in das Marktstammdatenregister unter dem Kundennamen muss innerhalb von 6 Monaten nach dem Kauf erfolgen. andernfalls behält sich BOGA das Recht vor, die gesetzliche Mehrwertsteuer zu fordern.

Description

Technical details and application:

The push-in connector is the “standard” for our profile rail connections. It is compressed in the middle, so it does not disappear completely in the profile. The assembly is done by inserting it into the first profile and then pushing it powerfully onto the second profile. For the 40 40 profile we recommend using two connectors per connection (except for profile 9664-Profiness15O where only one is needed).

It is possible to screw the 40 40 connectors additionally with drill screws from the outside, however this is not mandatory if the profile to be connected is joined in the middle at a push.

Since only one connector can be used for the Profiness15O profile, we recommend the additional fixing with two drill screws (5.5×38 mm).

For 80 40 and 40 20 profiles only one connector per connection point is required. However, it is recommended to screw in the insertion connectors of the 80 40 and 40 20 profiles additionally from the outside with thin-plate drilling screws (6.3×25 or 5.5×25 DIN 7504) to prevent slippage.

Free advice
for your PV system





    Individual and free construction planning