Roof clamp for standing seam metal roofs – 2 screws

Delivery time approx. 3-5 working days

VAT is not applicable & plus shipping costs

This mounting clamp is used for mounting photovoltaic systems on sloping roofs made of sheet metal with standing sheet metal seam.

Properties
Maximum stability, durability and weather resistance due to stainless steel
for standing seams up to 3.5 mm
in different versions

Personal pick-up in Hörstel / Wuppertal possible
Mengenvorteil 5,12  / Stück ab 50 Stück

5,12  / piece

from Price per unit
1 piece 6,39 
50 piece 5,12 
Categories: , ,

Photovoltaik AGBs:

  1. Der Null-Umsatzsteuersatz gemäß Abschnitt 12, Absatz 3 UstG gilt ab 01.01.2023 für Solarmodule sowie für wesentliche Komponenten zum Betrieb einer Photovoltaikanlage, einschließlich des Speichers, zur Aufbewahrung des mit den Solarmodulen erzeugten Stroms. Dies gilt nur für Photovoltaikanlagenbetreiber, wenn die Photovoltaikanlage in oder in der Nähe von Privatwohnungen, Wohnungen sowie öffentlichen und anderen Gebäuden, die für Gemeinnützigkeit genutzt werden, installiert wird. Die maximale Leistung der Anlage darf 30 kW (peak) gemäß Marktstammdatenregister nicht überschreiten.
  2. Der Käufer bestätigt durch Abschluss des Kaufvertrags mit einem Null-Umsatzsteuersatz, dass er als Photovoltaikanlagenbetreiber kauft und die in Absatz (1) beschriebenen Voraussetzungen erfüllt. Die Eintragung in das Marktstammdatenregister unter dem Kundennamen muss innerhalb von 6 Monaten nach dem Kauf erfolgen. andernfalls behält sich BOGA das Recht vor, die gesetzliche Mehrwertsteuer zu fordern.

Description

Technical details and application:

The clamp for mounting on sheet metal roofs with standing seam plays an important role in the installation of the photovoltaic system. Your main task is to fix the mounting rails on sloping roofs made of sheet metal with standing sheet metal seam. It forms the basis for the assembly rail construction on which the solar modules are mounted. By using stainless steel as material, it guarantees optimum weather resistance, durability and stability for the entire photovoltaic system.

Technical data (Roof Crimp Clamp for Standing Seam Sheet Metal Roofs):
Material stainless steel V2A
Mounting clamp pre-assembled

Fold width / fold thickness

1x clamp with adapter plate, 2x screw, 2x nut

to 3.5mm

Long hole for M10 screws
Weight 0.36kg

 

Overview of use (clamp for fastening on sheet metal roofs with standing seam):

Place the sheet metal clamp on the fold and fasten it temporarily. You can later align and screw them in during the installation of the profile rails. Then insert the hammer head screw into the lower profile chamber (groove) of the mounting rail and turn it 90 degrees counter-clockwise. Attach the screw through the adapter plate with the locking nut.

For the mounting of the solar modules, use the end clamp at the beginning and end of a module series as well as the middle clamp between two modules on the rail construction. To do this, slide the slot into the upper profile chamber (groove) of the mounting profile and screw the module clamp with the cylinder head screw and a spring ring.

Assembly requires qualified professionals. Especially work on the roof should be carried out by experienced roofers.

Free advice
for your PV system





    Individual and free construction planning